I masked off all the painted areas of the doors and sprayed semi-gloss black on the inside of the door panels.
After the door paint had dried, I reinstalled the door hardware. First was the remote mirror, door lock, door handle and inside door opening mechanizim. Second I installed the front vent window, tighting the mounting nuts finger tight. The rear window guide went in next, again only finger tighten the mounting nuts. The window regulator was installed next locating the glass in the front guide and the rear rollers in the rear guide. Next went in the window regulator and it was attached to the window glass. Close the door and adjust the top of the vent and door glass to be even and pressing against the weatherstripping. The second adjustment is for the window height. The door bumpers are in and the upper door glass seal is installed. The next thing needed is the inner door weatherstripping. Once everything was put together, I clipped on the inner door panel and installed the remaining door hardware.