VAX-VMS Storage Examples

Example#1

Device                  Device           Error    Volume         Free  Trans Mnt
 Name                   Status           Count     Label        Blocks Count Cnt
DSA0:                   Mounted              0  VAXVMSRL62      222032   354   1
DSA1:                   Mounted              0  CSMISUSER1      241398   103   1
DSA2:                   Mounted              0  CSMISUSER2      194625    40   1
DSA5:                   Mounted              0  CSMISUSER3     3322484     1   1
MyNode$DKA200:          Mounted wrtlck       0  VAXDOCDEC971      8199     1   1
$1$DIA0:       (ICS00)  ShadowSetMember      0  (member of DSA0:)
$1$DIA1:       (ICS01)  ShadowSetMember      0  (member of DSA1:)
$1$DIA2:       (ICS02)  ShadowSetMember      0  (member of DSA2:)
$1$DIA10:      (ICS10)  ShadowSetMember      0  (member of DSA0:)
$1$DIA11:      (ICS11)  ShadowSetMember      0  (member of DSA1:)
$1$DIA12:      (ICS12)  ShadowSetMember      0  (member of DSA2:)
$1$DIA13:      (ICS13)  Online               0
$1$DIA14:      (ICS14)  Mounted              0  SWAP            559023    12   1
$1$DIA51:      (ICS05)  ShadowSetMember      0  (member of DSA5:)
$1$DIA52:      (ICS05)  ShadowSetMember      0  (member of DSA5:)
 
Notes:
1. This is a uVAX-4300 processor with 2 embedded DSSI buses and a KZQSA
   Q-Bus/SCSI adapter
2. All ISE drives have SCS parameter ALLOCATION = 1 (hense $1$DIAxx)
3. ISE RFxx drives on DSSI bus #0
     DIA0,  DIA1,  DIA2
4. ISE RFxx drives on DSSI bus #1
     DIA10, DIA11, DIA12, DIA13, DIA14
5. SCSI drives connected to an HSD at DSSI node #5 on DSSI bus #0
     DIA51, DIA52
6. DSSI node names (in this example) are of the form ICSxx
7. DSA? are Disk Shadow Set Volumes (not hardware)
8. MyNode$DKA200 is a SCSI based CD ROM (RRD42) on a Q-Bus based SCSI

Example#2

Device                  Device           Error    Volume         Free  Trans Mnt
 Name                   Status           Count     Label        Blocks Count Cnt
MyNode$DUA0:            Mounted              0  VAXVMSRL62       25000   181   1
MyNode$DUA1:            Mounted              0  CSMISUSER1       49926    22   1
MyNode$DIA1:   (ICS01)  Online               0
MyNode$DIA151: (ICS15)  Online               0
MyNode$DIA152: (ICS15)  Online               0
 
Notes:
1. This is a uVAX-3800 processor with a KFQSA Q-Bus/DSSI adapter and a KDA50
   Q-Bus/MSCP adapter
2. All ISE drives have SCS parameter ALLOCATION = 0 (hense MyNode$DIAxx)
3. ISE RFxx drives on DSSI bus #0
     DIA1
4. SCSI drives connected to an HSD at DSSI node #5 on DSSI bus #0
     DIA151, DIA152
5. DSSI node names (in this example) are of the form ICSxx
6. DUAx are RA70 MSCP based drives

Documentation Links

• Note: DEC94MDS (links below) includes...
  • EK-335AC-IN-003 VAX 4000 (Model 300) Installation Guide (a.k.a. uVAX-4300)
  • EK-336AC-OP-003 VAX 4000 (Model 300) Operators Manual (a.k.a. uVAX-4300)
  • EK-337AB-TI-002 VAX 4000 (Model 300) Technical Information Guide (a.k.a. uVAX-4300)
• http://deathrow.vistech.net/~cvisors/DEC94MDS/ DEC document list
• http://decdoc.itsx.net/dec94mds/ DEC document list
• http://computer-refuge.org/classiccmp/dec94mds/ DEC document list
• http://bibernet.org/dec94mds/ DEC document list